Seven Evergreen SL Titanium Gravel Bike Frame w/ Custom Cobra Fork

Custom Titanium Seven Evergreen Frame hand made by Seven Cycles in Watertown, MA in 2014. This was originally built as a gravel bike, but the fork was replaced with a custom steel fork and rack made by Cobra Frames (now Cobra Framebuilding) for use in light touring and randonneuring. One photo of the frame and fork as part of a complete build is attached for reference. Only the frame, fork, headset, and stem are included in this listing. The frameset has features (see specs below) that make it versatile to build up in many different configurations for different uses. Both the frame and fork are high-quality custom builds. I ran 700x35mm tires with 45mm aluminum fenders (although there was a very tight clearance). The fork and frame can accommodate at least 38mm tires without fenders. Frame Specs 557mm Effective Top Tube length 480mm Seat Tube length 133mm Head Tube length 44mm Head Tube diameter 72.0° Head Tube angle 73.5° Seat Tube angle 135mm dropout spacing, for QR hubs Argen™ double-butted 3-2.5 Titanium tube set 3 water bottle cage mounts (bottom and top of downtube, inside of seatube) 68mm English bottom bracket shell brake cable housing guides on downtube (4) and left chainstay (3) (c-clip style) ISO disc brake caliper tab Vertical dropouts with threaded rack and fender bosses Seatstay bridge with threaded fender boss (on side facing front of bike) Chainstay bridge with threaded fender boss (on side facing rear of bike) Seatstays with threaded rack bosses Headtube with derauilleur cable housing stop on each side Bottom bracket shell with plastic cable guide Custom Seven seatpost clamp Raw titanium finish Frame Condition Raw titanium patina with some scuffs and scratches Downtube and toptube stickers were peeling and so were removed Made in USA and Seven Argen stickers on downtube and seattube near bb shell are intact Titanium Seven headtube badge Fork & Rack Specs 1 1/8" to 1 1/2" Paragon Machine Works tapered steerer tube True temper 1" tapered fork legs Paragon Machine Works steel double eyelet dropouts Paragon Machine Works ISO disc caliper tab 4130 rack tubing 400mm axel-to-crown 53mm rake 100mm fork end spacing, for QR hubs Threaded fender mount under fork crown rack mounts (three on each fork blade, upper two used for custom rack) Brake housing cable guide (c-clip style, 1) on rear of left fork blade cable guide for dynamo wiring (c-clip style, 2) on inside of right fork blade Rack is specifically designed for use with fork, mounting to two upper threaded bosses on each fork blade Rack includes rear tombstone for front bags Rack includes front mount for dynamo light Rack has threaded fender mount boss on underside 19x28cm rack platform Matte black powder coat on both rack and fork Fork & Rack Condition Pitting from oxidation on steerer tube near crown Black powder coat in good condition This frameset includes a Cane Creek 40 headset and a Seven 100mm black anodized aluminum stem with 31.8mm clamp diameter. The stem has scratches and the anodization is worn at the corners. The headset bearings are functional but should be replaced soon.