Mountain Bike Handlebar Adjustable Stem 25.4mm Bike Stem Riser MTB BMX

Handlebar Caliber 25.4mm Installation Steps ➢ Loosening up the front fork bolts with a 5mm Allen key, slide the replacement stem onto the steerer, then tighten the bolts. ➢ Loosen the expander bolt with a 6mm hex wrench and adjust the position of the stem, then re-tightening the bolts. ➢ Center the bars in the stem clamp, get it set at the angle you like, and then reattach the faceplate. ➢ Tightening each bolt on the faceplate to complete the installation. Features ➢ For 25.4mm Diameter Handlebars The stem riser is suitable for most bikes with 28.6mm (1 ⅛") steerer tubes and 25.4mm (1") diameter handlebars. ➢ Adjustable Height and Angle The bike handlebar extender's length is 110mm(length between the center of 2 cylindrical bores), and the adjustable angle between +60° and -60° to meet your desired riding position. ➢ Allen Wrenches Included The bicycle handlebar riser comes with 3 hex keys (M4, M5, M6), it is convenient for you to drive bolts on the threadless stems and the faceplate. ➢ Easy to Install Just connect up the original front fork stem and bar, adjust the angles, and tight all bolts with the Allen keys included. ➢ Aluminum Material The steerer tube extender is made from forged 6061 aluminum alloy, super strong, and lightweight. Specifications: Material: 6061 aluminum alloy Stem Diameter: 28.6mm(1-1/8") Steerer Height: 40mm Handlebar Clamp Diameter: 25.4mm Faceplate Width: 40mm Length: 110mm Angle: +60/-60 degree adjustable angle Colour: matt black Weight: 270 g Package Including: 1 x Handlebar stem riser 3 x Allen wrench
Road Handlebars
MTB Handlebars
Butterfly Handlebars
Aircraft Handlebar Store Categories
Store Categories
Handlebar Caliber 25.4mm Installation Steps ➢ Loosening up the front fork bolts with a 5mm Allen key, slide the replacement stem onto the steerer, then tighten the bolts. ➢ Loosen the expander bolt with a 6mm hex wrench and adjust the position of the stem, then re-tightening the bolts. ➢ Center the bars in the stem clamp, get it set at the angle you like, and then reattach the faceplate. ➢ Tightening each bolt on the faceplate to complete the installation. Features ➢ For 25.4mm Diameter Handlebars The stem riser is suitable for most bikes with 28.6mm (1 ⅛") steerer tubes and 25.4mm (1") diameter handlebars. ➢ Adjustable Height and Angle The bike handlebar extender's length is 110mm(length between the center of 2 cylindrical bores), and the adjustable angle between +60° and -60° to meet your desired riding position. ➢ Allen Wrenches Included The bicycle handlebar riser comes with 3 hex keys (M4, M5, M6), it is convenient for you to drive bolts on the threadless stems and the faceplate. ➢ Easy to Install Just connect up the original front fork stem and bar, adjust the angles, and tight all bolts with the Allen keys included. ➢ Aluminum Material The steerer tube extender is made from forged 6061 aluminum alloy, super strong, and lightweight. Specifications: Material: 6061 aluminum alloy Stem Diameter: 28.6mm(1-1/8") Steerer Height: 40mm Handlebar Clamp Diameter: 25.4mm Faceplate Width: 40mm Length: 110mm Angle: +60/-60 degree adjustable angle Colour: matt black Weight: 270 g Package Including: 1 x Handlebar stem riser 3 x Allen wrench

Returns Accepted for this item if it's within 30 Days