Mafia Bikes

Mafiabikes Super Kush  BMX -  Available in multiple colourways   The Super Kush builds on the quality of our hugely popular Kush 2+ complete bike but with a few choice changes thrown in to take it to the next level. 4130 chromo Bar and forks have been spec’d on the Super Kush to make the front end bulletproof, while shaving some weight. We’ve also added a 4130 downtube and chainstays to the frame to improve overall strength in the places you need it! Sealed female hubs all round will keep you rolling faster for longer while keeping your bike looking clean, coupled with our wide double-wall rims to take any abuse you can throw at them. The drivetrain is finished off with one of our awesome aftermarket 7075 gully sprockets. GEOMETRY A. TOP TUBE LENGTH 21" B. CHAINSTAY LENGTH 13.25" C. HEAD ANGLE 75° D. HEAD TUBE LENGTH 117mm E. SEAT TUBE ANGLE
70° F. STANDOVER 8.5" G. REACH 435mm H. STACK HEIGHT 366.5mm I. FORK OFFSET 30mm
K. BB HEIGHT 11.75" SPECS FRAME SuperKush FORK SuperKush Fork HANDLEBAR
Superkush W750mm X H230mm GRIPS Mafiabikes Lucky 6 150mm STEM Mafiabikes forged Topload - 50mm Reach HEADSET 1 1/8” Integrated - Sealed bearings SADDLE Mafiabikes 1 Piece mid integrated alloy post - Ø25.4 SEATPOST Ø25.4mm integrated with seat SEATCLAMP Integrated CRANKS 170mm 4130 chromoly heat treated 19mm 8 spline 3 piece cranks BOTTOM BRACKET Sealed Mid - 19mm ID PEDALS 9/16” Mafiabikes plastic CHAIN KMC Single speed 1/2"*1/8" CHAINRING/SPROCKET FRONT 25t Mafiabikes Gully CNC single speed sprocket 7075 SPROCKET/CASSETTE REAR 9t Semi sealed Cassette BRAKE FRONT Side pull cable brake (supplied in roadkit) BRAKE REAR BMX U-brake TYRE FRONT Lagos Crawler 20" x 2.4" TYRE REAR Lagos Crawler 20" x 2.4" RIM FRONT 20" Double wall alloy 36h RIM REAR 20" Double wall alloy 36h HUB FRONT Alloy shell, 3/8" Female axle, Non Disc HUB REAR Alloy shell, 3/8" Female axle, Non Disc TECH BB TYPE 73mm Mid Sealed (19mm) HEADSET TYPE 1 1/8” integrated REAR AXLE/HUB SPACING 3/8" x 110mm Female axle MAX TIRE WIDTH REAR (WITH 6MM CLEARANCE) 63.5mm / 2.5" SEATPOST/ SEATCLAMP Ø25.4mm post, intergrated seatclamp FRONT AXLE/HUB SPACING 3/8" x 100mm Female axle MAX TYRE WIDTH FRONT (WITH 6MM CLEARANCE) 63.5mm / 2.5" FRAME CONSTRUCTION & DETAILS .4130 Chromoly DT/CS .Tapered SS/CS .Mafia forged SS bridge .Integrated seatcamp FORK CONSTRUCTION .4130 Chromoly .Internally threaded steerer .CNC compression cap .Taper blades w/ peg recesses BIKE WEIGHT
11.8kg (26.0lbs) Terms of use Warranty claims will only be handled through the appropriate channel which is our online form. If you do not supply all of the requested information, your claim may be rejected. Please go to stomp-group.com Completes & parts 6 months manufacturer?s warranty covers unexpected failure/defect of all parts/components that may not be attributed to fair wear and tear, or crash damage outside that considered normal use. The claimant must be the original owner/purchaser and produce a receipt to prove the date of purchase. The parts/components must be free from modification including shot blasting and/or painting/powder coating where this may be attributed to the failure. Important - 1 week service As your bike will have been sent to you via mail order, it is your responsibility to ensure it has been assembled correctly. We allow you to assemble by yourself. However you must get a 1 week service by a qualified bicycle shop technician in order to qualify for your warranty. This is to ensure you have assembled your bicycle correctly and that everything is adjusted correctly e.g. spokes will need tightening, maybe your chain is too loose, brakes not set correctly, tyre pressure incorrect etc. If you do not have your 1 week service record (signed and stamped receipt), then your warranty is invalid. Examples of items not covered by your warranty:

worn tyres

worn/broken chains (unless clearly a manufacturing defect)

worn sprockets

worn bearings or hub internals

bent forks / frame / bars / axles / cranks / pedals

buckled wheels 

worn brake cables

Examples of items that are covered where it is clear there has been no abuse or misuse (note: you will need to supply photos of both sides of your bike & then may further be asked to return the failed component):

cracked or broken frames

cracked or broken forks

cracked or broken bars

cracked or broken hubs

internal axle failure bb/wheels

visible manufacturing defects to any part or component (should be reported as soon as noticed)

If a repair or replacement is not possible Mafiabikes reserve the right to offer an alternative of equal or greater value (colour may vary) or a partial refund proportional to the remaining life of the product. You are expected to keep your bike in serviceable condition. any failure attributed to incorrect or lack of maintenance will be easily detected by our engineers & in most cases rejected. When you make a claim, you will be expected to provide photographic evidence of your complete bike (photos of both sides even if it is a single small component failure) including close up shots of the failed component(s). In most instances you will then be required to send the failed part/component back to our head office for inspection at your own cost. Returns We accept returns for up to 30 days should you decide you do not want your item & it must be returned unopened, fitted or used in any original packaging. We must be informed of damaged items immediately. If there is damage to any returned parts in transit or if the value of item has been reduced as a result of over handling (for example more than you would in a shop) you may be liable for a deduction in the refund to cover our costs. Please ensure you package it well & send it back recorded delivery.

Returns Accepted for this item if it's within 30 Days