KNOW BEFORE YOU COMMIT TO BUY: Read the ENTIRE DESCRIPTION. Look at ALL THE PICS. RESEARCH compatibility prior to purchase. Thank you! Hello and thanks for checking out this listing of a used Giant TCR Carbon fork! This fork was removed from a pre-owned bicycle and will come to you in the very good used condition seen in the included photographs. Designed for road frames that require a tapered 1.5" to 1-1/8" steerer tube. The integrated crown race is a but funky on this one so PLEASE LOOK AT THE PICS. Its full carbon steerer tube was cut to a length of 251mm from the top of the fork crown to its end. Standard center-mount rim brake caliper and quick release hub required. For 700c wheels, 45mm rake. Axle to crown measurement is 375mm, meaning tire clearance is MAXED OUT at 27-28mm rubber depending upon tire/rim make/model. A WORD ON FITMENT: This is a used fork , so YES the steerer has been cut. If this seems obvious to you, congratulations on being among the minority of cyclists who understand that forks are produced with *very* long steerers which are then cut down. Measure the combined length of your head tube, spacers, and stem to determine if it is long enough for your application. Overall condition is a solid 7 out of 10 with typical signs of use such as evidence of front hub and brake installation and signs of road spray on the underside of the crown. The finish is in otherwise very good condition. This fork is ready for service in a new frame. Please see the included pics of the actual fork that you will receive. Please contact me with any questions, I will do my best to answer them. Review my feedback and buy with confidence. Thanks again! Please note that this fork is a used item and as such no warranty is included or implied. Don't forget to follow me on Instagram at "thehouseofcogs"!
Returns Accepted for this item if it's within 30 Days