CDHPOWER 2 Stroke Gas Motor YD100 CDH50mm Gas Motorized Bicycle

CDHPOWER 2 Stroke Gas Motor YD100 CDH50mm Gas Motorized Bicycle 79CC/80CC/100CC.
1
Key Product Features
Gasoline motor: YD100-CDH100CC(Real Displacement is 79cc/80CC)
Engine Type: Single cylinder, air-cooled,2-stroke
Mixing Ratio of Fuel(90#) and Engine Oil: 16: 1 for New sets, 20: 1 after Running 500Km
Power: 2.0KW
Bore and Stroke: 50mm x 40mm
Cylinder inner diameter: 50mm
Piston outside diameter: 50mm
Maximum speed:45-50km/h
8mm front and rear mount studs
Cylinder Head and Cylinder Two In One, better design for cooling, higher power with hill driving easily.
YD100-CDH100CC Differences with Standard 80cc engine kits:
Two in one cylinder,
Crank,
Piston kits,
CDI,
Carburetor,
CDHpower 2 Stroke YD100 Gas Engine ONLY, NO manual,YD100-CDH50mm 79CC/80CC Engine; Bore and Stroke: 50mm x 40mm; no CDH sticker on motor; Better adjusting clutch a little before riding
Excluding manual; Cylinder head and Cylinder two in one piece; 50mm bore; Improved magneto as well
Cylinder inner diameter 50mm; Piston outside diameter 50mm; 8mm front and rear mount studs; 40mm alum intake stud spacing
YD100 motor
Packing inside
Packing inside for YD100
packing inside of YD100 motor
2 stroke motor YD100
Bore and Stroke 50mm x 40mm
SPARK PLUG - YD100 MOTOR 100CC
ALLEN BOLTS
GEAR COVER
Allen bolts on intake side;
Spark plug excluded;
Buyers need clean the port before use which keep the long working life of motor
YD100 end bottom is different with standard 80cc one, so the jug and piston of 80cc are not compatible with yd100 100cc ones
Unique design on cylnder with 50mm bore and 40mm stroke
MUFFLER PORT
INTAKE SIDE
50mm bore
Muffler port
Clean the port before use to keep long working life of motor
Rear mount of yd100cc with front and rear studs 8mm
Rear displacement is 79cc/80cc
YD100 cylinder bore 50mm
Clean up the transfer port before use
345
Fit for most type 26” and 28” wheeled bikes with V-frame, such as mountain bikes, road bikes,cruisers, choppers.
The frame should have 9-11" of clearance between the bottom bracket and top bar, and the outside diameter of the frame downtube should be between 31.8mm to 42.5mm (around 125" to 1.67”).